固緯GSM-20H10數字源表

○最大輸出 ±210V/ ±1.05A/ 22W
○4.3” TFT LCD, 數字鍵盤
○四象限工作
○I/V曲線、I/t曲線、V/t曲線
○電壓源、電流源、數字電表功能
○0.012%基本測量精度, 6?數字電表測試, 1μV/10pA/10μΩ分辨率
○內置4種序列輸出模式(Stair、Log、SRC-MEM、Custom), 最多2500點
○SDM(Source Delay Measure)
○2/4/6線電阻測試遠程V-source和Measure Sensing
○內置Pass/Fail功能
○接口: RS-232C, USBTMC, LAN, GPIB(選配)

GSM-20H10提供±210V / ±1.05A / 22W的四象限操作。在第一象限和第三象限，它們作為電源運行，為負載供電。在第二和第四象限，它們作為負載使用，在內部耗散功率。而電壓值、電流值和電阻值可以在電源或負載操作期間進行量測，其準確度高達0.012%并且分辨率可達1µV/10pA/10µΩ。

采樣的速度上，GSM-20H10支持最高50k點/每秒的采樣速度，可更精準地針對待測物的特性進行分析。透過4.3寸的大尺寸屏幕，更可以將所有的量測設定、參數與結果都完整的顯示在屏幕上。支持SDM (Source Delay Measure)功能，可設定信號產生變化時，延后進行采樣，避免穩定前的信號被擷取進去造成誤判。內建四種程序輸出模式(Linear, Log, SRC-MEM, Custom)，最多可支持2500個點的程序變化輸出。

在設備保護上，GSM-20H10提供了OVP/OTP保護模式；在OVP的設計上，使用者可自定義OVP的范圍，而OTP的保護則可有效防止在測試過程中因溫度偏移造成的錯誤。在接口部分，本產品支持標準的SCPI指令，提供RS-232 , USBTMC , LAN, GPIB (選配)等接口，滿足用戶不同的接口需求。

產品規格

Maximum Range	Voltage		±210V
	Current		±1.05A
	Power		22W
	Voltage Resolution		1µV
	Current Resolution		10pA
Source	DC Voltage	Output Voltage	±21V/ ±1.05A, ±210V/±105 mA
		Current Limit	Min. 0.1% of range
		Programming Resolution	1µV, ±200.000mV range
			10µV, ±2.00000V range
			100µV, ±20.0000V range
			1mV, ±200.000V range
		Programming Accuracy 1	±(0.02%+600µV), ±200.000mV range
			±(0.02%+600µV), ±2.00000V range
			±(0.02%+2.4mV), ±20.0000V range
			±(0.02%+24mV), ±200.000V range
		Load Regulation	0.01% of range + 100µV
		Line Regulation	0.01% of range
		Overshoot	<0.1% typical (full scale step, resistive load,10mA range)
		Recovery Time (1000%Load Change)	<250µs (within 0.1% plus load regulation errors, 1A and 100mA compliance.)
		Ripple and Noise	4mV rms(20Hz~ 1MHz) 10mVpp(20Hz~ 1MHz)
		Temperature Coefficient (0°–18°C & 28°–50°C)	±(0.15 × accuracy specification)/°C
	DC Current	Output Current	±1.05A /±21V, ±105 mA /±210V
		Voltage Limit	Min. 0.1% of range
		Programmed Source Resolution	10pA, ±1.00000µA range
			100pA, ±10.0000µA range
			1nA, ±100.000µA range
			10nA, ±1.00000mA range
			100nA, ±10.00000mA range
			1µA, ±100.000mA range
			10µA, ±1.00000A range
		Programmed Source Accuracy 1	±(0.035%+600pA), ±1.00000µA range
			±(0.033%+2nA), ±10.0000µA range
			±(0.031%+20nA), ±100.000µA range
			±(0.034%+200nA), ±1.00000mA range
			±(0.045%+2µA), ±10.00000mA range
			±(0.066%+20µA), ±100.000mA range
			±(0.27%+900µA), ±1.00000A range
		Load Regulation	0 0.01% of range + 100pA
		Line Regulation	0.01% of range
		Overshoot	<0.1% typical (1mA step, RL = 10kΩ, 20V range).
		Temperature Coefficient (0°–18°C & 28°–50°C)	±(0.15 × accuracy specification)/°C
	General	Output Settling Time2	100µs typical Time
		Output Rise Time (±30%)	300µs, 200V range, 100mA compliance.
			150V/µs, 20V range, 100mA compliance.
		DC Floating Voltage	Output can be floated up to ±250VDC
		Remote Sense	Up to 1V drop per load lead.
		Compliance Accuracy	Add 0.3% of range and ±0.02% of reading to base specification.
		Range Change Overshoot 3	Adjacent range changes between 200mV, 2V and 20V ranges, 100mV typical.
		Minimum Compliance Value	0.1% of range
		Command Processing Time 4	Autorange On:10ms.Autorange Off:7ms.
Measurement	Voltage	Input Resistance	>10 G?
		Measurement Resolution	1µV, ±200.000mV range
			10µV, ±2.00000V range
			100µV, ±20.0000V range
			1mV, ±200.000V range
		Measurement Accuracy	±(0.012%+300µV), ±200.000mV range
			±(0.012%+300µV), ±2.00000V range
			±(0.015%+1.5mV), ±20.0000V range
			±(0.015%+10mV), ±200.000V range
		Temperature Coefficient (0°–18°C & 28°–50°C)	±(0.15 × accuracy specification)/°C
	Current	Voltage Burden (4-wire mode)	< 1mV
		Programmed Source Resolution	10pA, ±1.00000µA range
			100pA, ±10.0000µA range
			1nA, ±100.000µA range
			10nA, ±1.00000mA range
			100nA, ±10.00000mA range
			1µA, ±100.000mA range
			10µA, ±1.00000A range
		Programmed Source Accuracy1	±(0.029%+300pA)), ±1.00000µA range
			±(0.027%+700pA), ±10.0000µA range
			±(0.025%+6nA), ±100.000uA range
			±(0.027%+60nA), ±1.00000mA range
			±(0.035%+600nA), ±10.00000mA range
			±(0.055%+6µA), ±100.000mA range
			±(0.22%+570µA), ±1.00000A range
		Temperature Coefficient (0°–18°C & 28°–50°C)	±(0.1 × accuracy specification) / °C
	Resistance	Range	Resolution	Test current			Accuracy
		<2.00000Ω	---	---			Source IACC+Meas.VACC
		2.00000Ω	10µΩ	---			Source IACC+Meas.VACC
		20.0000Ω	100µΩ	100mA			±(0.1%+0.003 Ω), Normal
							±(0.07%+0.001 Ω), Enhanced
		200.000Ω	1mΩ	10mA			±(0.08%+0.03 Ω), Normal
							±(0.05%+0.01 Ω), Enhanced
		2.00000kΩ	10mΩ	1mA			±(0.07%+0.3 Ω), Normal
							±(0.05%+0.1 Ω), Enhanced
		20.0000kΩ	100mΩ	100µA			±(0.06%+3 Ω), Normal
							±(0.04%+1 Ω), Enhanced
		200.000kΩ	1Ω	10µA			±(0.07%+30 Ω), Normal
							±(0.05%+10 Ω), Enhanced
		2.00000MΩ	10Ω	5µA			±(0.11%+300 Ω), Normal
							±(0.05%+100 Ω), Enhanced
		20.0000MΩ	100Ω	0.5µA			±(0.11%+1k Ω), Normal
							±(0.05%+500 Ω), Enhanced
		200.000MΩ	1kΩ	100nA			±(0.66%+10k Ω), Normal
							±(0.35%+5k Ω), Enhanced
		>200.000M Ω	---	---			Source IACC+Meas.VACC
		Temperature Coefficient (0°–18°C & 28°–50°C)	±(0.15 × accuracy specification)/°C
		Source I mode, Manual OHMS	Total uncertainty = I source accuracy + V measure accuracy (4-wire remote sense).
		Source V mode, Manual OHMS	Total uncertainty = V source accuracy + I measure accuracy (4-wire remote sense).
		6-wire OHMS mode	Available using active ohms guard and guard sense. Max. Guard Output Current: 50mA (except 1A range). Accuracy is load dependent.
		Guard Output Impedance	<0.1? in ohms mode
System Speed	Maximum Range Change Rate		75/second
	Maximum Measure Auto Range Time		40ms (fixed source) 6
	Sequence reading rates7 (rdg./second) for 60Hz (50Hz)	Speed	NPLC/ Trig Origin	Measure				Source-Measure 9
				TO MEM.	TO GPIB			TO MEM.		TO GPIB
		Fast	0.01 / internal	2081 (2030)	1198 (1210)			1551 (1515)		1000 (900)
		488.2	0.01 / external	1239 (1200)	1079 (1050)			1018 (990)		916 (835)
		Medium	0.1 / internal	510 (433)	509 (433)			470 (405)		470 (410)
		488.2	0.1 / external	438 (380)	438 (380)			409 (360)		409 (365)
		Normal	1 / internal	59 (49)	59 (49)			58 (48)		58 (48)
		488.2	1 / external	57 (48)	57 (48)			57 (48)		57 (47)
		Speed	NPLC/ Trig Origin	Source-Measure Pass/Fail test 8,9				Measure Memory 9
				TO MEM.	TO GPIB			TO MEM.		TO GPIB
		Fast	0.01 / internal	902 (900)	809 (840)			165 (162)		164 (162)
		488.2	0.01 / external	830 (830)	756 (780)			163 (160)		162 (160)
		Medium	0.1 / internal	389 (343)	388 (343)			133 (126)		132 (126)
		488.2	0.1 / external	374 (333)	374 (333)			131 (125)		131 (125)
		Normal	1 / internal	56 (47)	56 (47)			44 (38)		44 (38)
		488.2	1 / external	56 (47)	56 (47)			44 (38)		44 (38)
	Single Reading Operation Rates (rdg./second) for 60Hz (50Hz)	Speed	NPLC/ Trig Origin	Measure		Source-Measure 9			Source-Measure Pass/Fail test 8,9
				TO GPIB		TO GPIB			TO GPIB
		Fast(488.2)	0.01 / internal	256 (256)		79 (83)			79 (83)
		Medium(488.2)	0.1 / internal	167 (166)		72 (70)			69 (70)
		Normal(488.2)	1 / internal	49 (42)		34 (31)			35 (30)
	Component Interface Handler Time for 60Hz (50Hz):8, 10	Speed	NPLC/ Trig Origin	Measure		Source Pass/Fail test			Source-Measure Pass/Fail test 9,11
				TO GPIB		TO GPIB			TO GPIB
		Fast	0.01 / internal	1.04 ms (1.08 ms)		0.5 ms (0.5 ms)			4.82 ms (5.3 ms)
		Medium	0.1 / internal	2.55 ms (2.9 ms)		0.5 ms (0.5 ms)			6.27 ms (7.1 ms)
		Normal	1 / internal	17.53 ms (20.9 ms)		0.5 ms (0.5 ms)			21.31 ms (25.0 ms)
System General	Load Impedance		Stable into 20,000pF typical
	Differential mode Voltage		250 VPk
	Common mode Voltage		250 VDC
	Common mode Isolation		>10G?, <1000pF
	Over Range		105% of range, source and measure.
	Max. Voltage drop		5V
	Max. Sense lead Resistance		1M?
	Sense input Impedance		>100G ?
	Guard offset Voltage		<150µV, typical
	Source output modes		Fixed DC level, Memory List (mixed function), Stair (linear and log)
	Source memory list		100 points max.
	Memory buffer		5,000 readings @ 5 digits (two 2,500 point buffers). Includes selected measured value(s) and time stamp. Lithium battery backup(3 yr+ battery life).
	Programmability		IEEE-488.2 (SCPI)
			5 user-definable power-up states plus factory default and *RST.
	Digital I/O Connector		Active low input.
			Start of test, end of test, 3 category bits.
			+5V@ 300mA supply.
			1 trigger input, 4 TTL/Relay Drive outputs (33V @ 500mA, diode)
	Remote Interface		USB/GPIB/LAN/RS-232
	Insulation	Chassis and Terminal	20M? or above (DC 500V)
		Chassis and AC cord	30M? or above (DC 500V)
	Operation Environment		Indoor use, Altitude: ≤ 2000m Ambient temperature: 0 ~ 40°C Relative humidity: ≤ 80%
			Installation category: II, Pollution degree: 2
	Storage Environment		Temperature: -20?C ~ 70?C
			Humidity: < 80%
	Input Power		100-240VAC, 50-60Hz
	Power Consumption		80W
	Accessories		CD User manual x1, Quick Start manual x1
			Test lead GTL-207A x 1, GTL-108A x 1, ALLIGATOR CLIP x 2
	Dimensions		214 (W) x 86 (H) x 356.5 (D) mm
	Weight		Approx. 4.8kg

Remarks

Speed = Normal (1 PLC). For 0.1 PLC, add 0.005% of range to offset specifications, except 200mV, 1A ranges, add 0.05%. For 0.01 PLC, add 0.05% of range to offset specifications, except 200mV, 1A ranges, add 0.5%.
Required to reach 0.1% of final value after Command is processed. Resistive load. 10µA to 100mA range.
Overshoot into a fully resistive 100k? load, 10Hz to 1MHz BW, adjacent ranges: 100mV typical, except 20V/200V.
Maximum time required for the output to begin to change following the receipt of :SOURce:VOLTage|CURRent <nrf> Command
Reading rates applicable for voltage or current measurements, autorange off, filter off, display off, trigger delay = 0, and binary reading forma.
Purely resistive lead. 1µA and 10µA ranges <65ms.
1000 point sweep was characterized with the source on a fixed rang.
Pass/Fail test performed using one high limit and one low math limit.
Includes time to re-program source to a new level before making measurement.
Time from falling edge of START OF TEST signal to falling edge of END OF TEST signal.
Command processing time of :SOURce:VOLTage|CURRent: TRIGgered<nrf> Command not included.

產品詳情

產品中心

PRODUCT CENTER

넳 넲

ꄴ前一個： GWINSTEK固緯GPE-1205/GPE-1323新款直流穩壓電源替代GPS-1830D/1850D和GPS-3030DD/3030D

ꄲ后一個：固緯雙范圍直流穩壓電源SPD-3606（開關式）